高端电压小电流值耐压报告仪（耐电弧放电耐压报告仪）-（来计算机专业把握）

High voltage low current tester (arc resistance tester) - (computer control)

新产产品名字称：耐电弧试验机

Product name: electric arc resistance tester

食品款式：NDH-A

Product model: NDH - A

足够细则：GB/T 1411-2002《胶体绝缘带板材耐高压得很低的电压电流电弧焊接尖端放电的可靠性试验》（等一起IEC  61621-1997）及ASTM D495等规范标准的追求制作生产的，并契合IEC 149、UL 746A等试验台具体方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

重要实用依据及模块：

本耐压公测仪是决定应运于直流电机、物品落球回弹试验仪,介电击穿强度测定仪和家装物品落球回弹试验仪,介电击穿强度测定仪等制造业的电工作业用pp塑料材质、环氧树脂胶胶和电电隔绝性漆等电电隔绝性原文件的耐电弧放电焊接耐腐蚀性考评，主代替固态垃圾电电隔绝性原文件如：pp塑料材质、保护膜、环氧树脂胶、白云母、卫浴陶瓷、的玻璃、电电隔绝性油、电电隔绝性漆、纸箱等媒质的耐电弧放电焊接耐腐蚀性公测；

本疲劳试验仪由计算机软件把控正常运作，就可以出现某些工作科学试验心态及科学试验时段，科学试验结束后后并存为某些工作科学试验数据分析，并可缩印.要求实验室报告单。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为下一梯设备构造，中下部为操作的系统，上侧为应力测试箱。

2 本品牌按照*新智慧掌握科技，经过选泽子程序（IEC或ASTM）可自动化使用实验设计，并在电子产品上显示信息疲劳试验过程中和数据。

3 **能优异，抗干涉业务能力强，考试要求高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断日子不确定度：不大于 ±10ms

2 调压器数量：2kVA

3 额定容量做实验的时候电阻值：12.5kV

4 校正端电压精密度：±3%

5 电流大小管控精确：±10%  电流量测试可靠性强，精密度：1.5%

6 参比电极对试件材料负担：（0.5±0.05）N

7 电极产品产品：钨棒

8 电极材料空距：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 利用环境室内温度：（23±2）℃

10 施用坏境温度湿度：（50±5）%

11 电源线：220V±5%  50Hz  10A

12 应力测试    方案：   行业标准/美标/10 mA 反复/20 mA 间断性/30 mA接连/40 mA连续不断

13 试验检测程度如下图所示：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 车辆参数：

NDH-A    耐脉冲试验检测仪-微机把握

NDH-B    耐电弧焊接冲击试验仪-触感屏调整

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！